Results 1 to 3 of 3

Thread: CPM-154 all-Ti framelock

  1. #1
    Gold Member Buffalohump's Avatar
    Join Date
    Feb 2011
    Location
    Durban
    Posts
    941

    CPM-154 all-Ti framelock

    This one is just gathering dust so thought someone here might like to grab it. Such a sweet knife...

    OK, the details are its an all-Ti framelock made by Marty Young, Kentucky, USA with a lekker pattern of relief holes in the main slab. Each hole is polished on the inside for additional visual interest.

    Closed length is just under 12,5cms. Blade length is 9cms. Its 1cm thick across the spine. Blade is just over 3mms. Blade steel is CPM-154 with a high hollow grind. It has been reprofiled by MadRookie and he did a bang-up job. Its a gorgeous edge. Blade has a lovely hand-rubbed satin finish. Lock-up is rock solid and sits at just under 50%. Opening is butter smooth and effortless. Good positive detent. Dead nuts centering. Knife is in mint, as-new condish. Comes in a nylon belt pouch if you like to carry that way.

    Its a great EDC, sturdy but not too heavy but with plenty of blade and it rides nice and easy in the pocket with a low profile. Of course it is razor sharp. I am asking R3,500 SOLD which I think is pretty damn fair for an all-Ti framelock these days. Shipping is on you, depending what you want. PM if you have a question or post in the thread if you prefer.











    Little vid so you can get a better idea of it:

    Last edited by Buffalohump; 07-24-2014 at 02:33 PM.

  2. #2
    Wow ,,nice knife

  3. #3
    Gold Member Buffalohump's Avatar
    Join Date
    Feb 2011
    Location
    Durban
    Posts
    941
    Bump 'n a one time drop to R3,350!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •