PDA

View Full Version : Sharpening angles...various steels



Eldergeek
05-04-2014, 02:49 PM
Is there a concise guide anywhere as to the correct sharpening angles for various steels?
Or is this based purely on the task at hand?

ravingDIODE
05-04-2014, 04:02 PM
I would rate purely depends on the task it would be used for.

However, I will wait for MadRook to chime in :thumbsup:

Eldergeek
05-04-2014, 05:04 PM
I'm sure the Maestro will comment, I've searched high and low thinking there would be a form of guideline not written in stone as the cutting tasks at hand, blade type , thickness all play a part.

As this is a forum with many knife knuts of repute who have no doubt lurked on other forums over the years, A possible guide could be out there .....hopeful -;)