PDA

View Full Version : Burger N690



MadRookie
04-19-2014, 09:39 PM
Wow Mr Burger - your HT is simply great!!!

This was one of two blades I dressed for a forum member today.

Super light carry worker.

http://i126.photobucket.com/albums/p114/MadRookie/20140419_193220_zpsb811d964.jpg (http://s126.photobucket.com/user/MadRookie/media/20140419_193220_zpsb811d964.jpg.html)
http://i126.photobucket.com/albums/p114/MadRookie/20140419_193148_zps08645f1b.jpg (http://s126.photobucket.com/user/MadRookie/media/20140419_193148_zps08645f1b.jpg.html)
http://i126.photobucket.com/albums/p114/MadRookie/20140419_193126_zps40a60849.jpg (http://s126.photobucket.com/user/MadRookie/media/20140419_193126_zps40a60849.jpg.html)


:)

ravingDIODE
04-19-2014, 10:02 PM
:smile:

Glad to see this one panned out with the HT!

Looking forward to seeing the blade :P

shakes_still
04-23-2014, 02:49 AM
I've only seen dodgy ht's on n690 surprisingly... big fat burrs edge rolling... I was starting to get worried

marthinus
04-23-2014, 08:21 AM
I have and know a few people have some Burger knives and everyone beats the same drum. Trevor and family do a great heat treat on N690 :thumbsup:

Buffalohump
04-25-2014, 08:34 AM
Great work as always Rook.... I had a LEXK for a time and was very impressed with it.

MadRookie
04-25-2014, 08:54 AM
Thx Mark - appreciated.

Pity that the owner uses it to look into the edge to comb his hair, and not to cut things.....

Hehehe.

:)

ravingDIODE
04-25-2014, 09:01 AM
Thx Mark - appreciated.

Pity that the owner uses it to look into the edge to comb his hair, and not to cut things.....

Hehehe.

:)

Hey! I don't comb my hair.. I just put my fingers through it when I wake up ;)

It cuts hose pipes quite nicely, AND squirrel tail! As I almost got home the other night, there was a dead squirrel in the road. Sisters loves them so I got out, saw it was stiff but the tail all too fluffy and soft. So I put it on the side of the road and cut the tail off. I had to cut through the cartelidge and bone. So I can say i have finally used it for cutting something other than meat packaging and steak ;)


Sent from my iPad using Tapatalk

MadRookie
04-25-2014, 09:20 AM
....errr... a dead tail for your sister.....

You have *alls to be that kind to her.

How did the edge look after the cartilage cutting?

Well done.

Glad you are using it - see, that was easy.

:)

ravingDIODE
04-25-2014, 09:27 AM
Haha she was so happy. Holding the tale and fluffing it around. No she salted it to let it dry.

It looks fine. Has some slight scuffing on the edge but like duh it would. That is just the mirror finish though. No effect on cutting edge and am enjoying the sharp blade.


Sent from my iPad using Tapatalk

Buffalohump
04-25-2014, 09:41 AM
Heckfire... your sister loves dead squirrels? Her name's not Darryl by any chance is it? :biggrin:



It cuts hose pipes quite nicely, AND squirrel tail! As I almost got home the other night, there was a dead squirrel in the road. Sisters loves them so I got out, saw it was stiff but the tail all too fluffy and soft. So I put it on the side of the road and cut the tail off. I had to cut through the cartelidge and bone. So I can say i have finally used it for cutting something other than meat packaging and steak ;)


Sent from my iPad using Tapatalk

ravingDIODE
04-25-2014, 09:41 AM
Haha naaaa just the tails hehe


Sent from my iPad using Tapatalk